Home / CHEMICAL ENGINEERING TOPICS AND MATERIALS / DESIGN AND OPERATION OFA SHELL AND TUBE HEAT EXCHANGER

DESIGN AND OPERATION OFA SHELL AND TUBE HEAT EXCHANGER

DESIGN AND OPERATION OF A SHELL AND TUBE HEAT EXCHANGER

TABLE OF CONTENT

CHAPTER ONE

Introduction

CHAPTER TWO

2.0              Literature Review

2.0.1        Classification of heat Exchanger

2.0.2        Categories of heat exchangers

2.0.3        Types of heat exchangers

2.0.4        Material for constructions

2.0.5        Tube shape and position

2.0.6        Firing

2.0.7        Heat source

2.0.8        Design approval of a heat exchanger

2.0.9        Designing a heat exchanger

2.0.10    Essentials in the heat exchanger design

2.0.11    Step by step approach to designing

CHAPTER THREE Design algorithm for a shell and tube heat exchanger CHAPTER FOUR Discussion of heat exchanger algorithm computer program CHAPTER FIVE Conclusion and recommendation

Nomenclatures

References

CHAPTER ONE

INTRODUCTION

The most common type of heat exchanger used in industry contains a number of parallel tubes enclosed in a shell and is thus called a shell and tube heat exchanger.  These heat exchangers are employed when a process required large quantities of fluid to be heated or cooled.  Due to their compact design, these heat exchangers contain a large amount of heat transfer area and also provide a high degree of heat transfer efficiency.

Over the years, many different types of shell and tube heat exchangers, have been designed to meet various process requirements.  In the industry today, heat exchangers are most often designed with the aid of software program.  Given the required specifications for a heat exchanger, these simulators perform the appropriate calculations.

In this project, we try to use a computer approach in designing a shell and tube heat exchanger.  We started by designing an algorithm that covers the chemical engineering design such as the estimation of fluid and material properties, film and overall heat transfer coefficient, exchanger surface, tube layout and pressure drop.  It also covers the mechanical engineering design of calculating the shell and channel thickness, shell cover thickness, channel cover thickness e.t.c.

These algorithm was translated unto a program using a micro soft visual basic 6.0, an object oriented computer programming language.

With this program, the computer takes over and automatically per for all the complex computations with little or no human effort and gives an output which is the design information needed.

 

Download Full and Complete Project

Sharing is caring!

About Hope Ovat

Check Also

PRODUCTION OF WOOD ADHESIVE

PRODUCTION OF WOOD ADHESIVE Format: Ms Word Document Pages: 68 Price: N 3,000 Chapters: 1-5 …

THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSION PAINT

THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSION PAINT Format: …

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH Format: Ms Word Document Pages: 65 Price: …

PRODUCTION OF LIQUID AND VAPOURIZED PERFUME

PRODUCTION OF LIQUID AND VAPOURIZED PERFUME Format: Ms Word Document Pages: 65 Price: N 3,000 …

PRODUCTION OF PLASTIC MATERIALS

PRODUCTION OF PLASTIC MATERIALS Format: Ms Word Document Pages: 70 Price: N 3,000 Chapters: 1-5 …

PRODUCTION OF PLANE MIRROR USING LOCAL RAW MATERIAL

PRODUCTION OF PLANE MIRROR USING LOCAL RAW MATERIAL Format: Ms Word Document Pages: 65 Price: …

Leave a Reply