FABRICATION OF A FOLDABLE CAMP BED

FABRICATION OF A FOLDABLE CAMP BED
 ABSTRACT

In this project, three alternative design solutions were considered for the foldable cam – bed. The authors utilize the local materials (with cost consideration) for the components. The merits and demerits of each of the alternative with respect to the considered group were also discusses and the solutions of the alternatives that best satisfied the limitations were selected for production. The material selected design and cost analysis, production processes and operation maintenance and problems encountered during the design were also included.

TABLE OF CONTENTS CHAPTER ONE Introduction Limitation of existing foldable camp – bed

Design specification of the foldable camp – bed

CHAPTER TWO Literature Review

Component parts of the foldable camp – bed

The Angel Iron

The catcher

The cover

The brackets

The square pipe CHAPTER THREE Design solution

Alternative A

Merit

Demerit

Alternative B

Merit

Demerit

Alternative C

Merit demerits

CHAPTER FOUR Material selection

Mild steel

Standard parts used

CHAPTER FIVE Description of foldable camp – bed CHAPTER SIX Cost and design analysis

Stages of design process

Conceptual stage

Acceptance stage

Functional stage

Translation stage

Stage of production

Weldability

Impact resistance

Possible defects in the materials

Deterioration due to wear and corrosion

Defects on workmanship

Extent of use of a particular material

CHAPTER SEVEN

Construction

CHAPTER EIGHT Economic Analysis

Material cost Analysis

Machine cost Analysis

Labour cost

CHAPTER NINE Operation of the foldable camp – bed

The viability of the system

CHAPTER TEN

Conclusion

Recommendation

References

CHAPTER ONE

1.0       INTRODUCTION

Camp bed is used universally for relaxation, emergency eases such as war and in other several ways, it is the acknowledgement of these resources that led to the design of the foldable camp – bed. All the existing foldable camp bed, have almost the same dimension but differ in design. Some use rope and ailets while the modern design make use of wood and spring. Some other are constructed using straight bars, pipes of angle iron.

1.10          LIMITATION OF ALREADY EXISTING FOLDABLE CAMP – BED

Some foldable camp beds are made of Iron bars which are too heavy and cannot be carried with ease. Most existing foldable camp – bed are cumbersome to carry because their lengths which are normally six feet or 183 meters or 1830mm.

Some of the materials used for fabrication of the foldable camp bed may not be locally got and this affects its prince, making its availability to become more rare.

In the market, design that make use of springs to hold the improvised materials or even wood are found. But when the spring fill off, its efficiency is reduced and this make it more profitable to make use of wood than spring to hold improvised mattress.

DESIGN SPECIFICATION OF THE FOLDABLE CAMP BED

It is high in weight

It can be produced locally

It is portable

It has an in built head rest which is adjustable. The tarpaulin material used in folding the foam to the wood can be easily removed along with the wood for cleaning.

It is could carry a person up to 75kg in weight. Pipes (square) used are made of galvanized steel and also the angle Iron used is made if galvanized steel both painted with aluminum oil paint to avoid corrosion.

It is easy to manipulate.

All these specification put together make this project a viable one that can compete favorably with any existing foldable camp bed and also eliminate the limitations posses by earlier designers.

Download Full and Complete Project

About Hope Ovat

Check Also

THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSION PAINT

THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSION PAINT Format: …

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH Format: Ms Word Document Pages: 65 Price: …

PRODUCTION OF LIQUID AND VAPOURIZED PERFUME

PRODUCTION OF LIQUID AND VAPOURIZED PERFUME Format: Ms Word Document Pages: 65 Price: N 3,000 …

PRODUCTION OF PLASTIC MATERIALS

PRODUCTION OF PLASTIC MATERIALS Format: Ms Word Document Pages: 70 Price: N 3,000 Chapters: 1-5 …

PRODUCTION OF PLANE MIRROR USING LOCAL RAW MATERIAL

PRODUCTION OF PLANE MIRROR USING LOCAL RAW MATERIAL Format: Ms Word Document Pages: 65 Price: …

 ASSESSMENT OF THE PHYTOCHEMICAL CONSTITUENTS AND PROXIMATE COMPOSITION OF AFRICAN PEER

 ASSESSMENT OF THE PHYTOCHEMICAL CONSTITUENTS AND PROXIMATE COMPOSITION OF AFRICAN PEER Format: Ms Word Document …

Leave a Reply

Your email address will not be published. Required fields are marked *