CHEMISTRY PROJECT TOPICS AND MATERIALS

DESULPHURSATION KEROSENE ABSTRACT The production of the soap was carried out using all the necessary equipments like the reactor, mould, stirrer, hygrometer guage etc. and all the required reagents for soap production in correct proportion. In the production, palm kernel oil (P.K.O) was used instead of tallow or grease.  This …

DESIGN AND OPERATION OF A SHELL AND TUBE HEAT EXCHANGER  TABLE OF CONTENT CHAPTER ONE Introduction CHAPTER TWO 2.0              Literature Review 2.0.1        Classification of heat Exchanger 2.0.2        Categories of heat exchangers 2.0.3        Types of heat exchangers 2.0.4        Material for constructions 2.0.5        Tube shape and position 2.0.6        Firing 2.0.7        Heat source …

EFFECTS OF PROCESSING METHODS ON THE PHYSICO-CHEMICAL PROPERTIES OF SWEET POTATO AND SORGHUM Abstract This study evaluated “the effects of processing methods on the physico-chemical properties of sweet potato and sorghum flour”. Sweet potato (Ipomoea batatas) is an important food crop in the tropical and sub-tropical countries and belongs to …

 ALTERNATIVE RAW MATERIAL SOURCES FOR CEMENT PRODUCTION Abstract It is generally known that cement id produced from limestone, mar/clay and gypsum by the following three basic process- wet semi- wet aid dry process. The cost of exploiting the limestone: the major raw material constitute about 50% of the production cost …

COMPARATIVE ANALYSIS OF COAL AND COCONUT ACTIVATED CARBON ANALYSIS OF CRUDE PALM OIL ABSTRACT The experiment was carried out to analyze comparatively coal and coconut activated carbon.  The coal sample used in bituminous and with density of 1300kg 1m3 tile coconut shell was used. The coal and coconut shell was first activated using …

THE BLEACHING OF PALM OIL USING ACTIVATED CHARCOAL SYNTHESIS OF ACTIVATED CARBON FROM ENUGU COAL ABSTRACT This project work is on the bleaching of palm oil using activated charcoal. The charcoal used for this work was made from pieces of animal bone by carbonization method.  It was then activated into two …

 THE EFFECT OF LIQUID FLOW RATE AND GAS FLOW RATE ON A PACKED ABSORPTION TOWER AND REPAIR OF EQUIPMENT ABSTRACT The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to …

PRODUCTION OF ALKALI USING LOCAL RAW MATERIAL (PALM INFORESCENCE) Abstract The project aims to develop a flow process to obtain the optimum temperature and time necessary for the maximum recovery of alkali present in palm inflorescence. On this ground, a preliminary experiment was performed. During this process, both male and …

MODIFICATION OF SURFACE, PHYSICAL AND CHEMICAL PROPERTIES OF ACTIVATED CARBONS FOR WATER PURIFICATION ABSTRACT The purpose of this work was to study the effect of chemical surface properties of activated carbons for their use in water purification. To achieve this objective, activated carbon in both granular and powdered forms namely: …

  EVALUATION OF THE EFFICACY OF THE CARESTART MALARIA HRP2 AND PLDH/HRP2 COMBO COMPARED TO MICROSCOPY IN THE DIAGNOSIS OF MALARIA. CHAPTER ONE 1.0     INTRODUCTION Malaria is a life-threatening illness, that has continued to pose public health challenges. It affects millions of people all around the globe especially, in Africa, …