Home / MECHANICAL ENGINEERING PROJECT TOPICS AND MATERIALS / REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

ABSTRACT

This project is concerned write the identification of those defects that are found in most of the drawing tables in the Mechanical Engineering drawing studio.

The report investigates the possible ways through which the mentioned above can be brought back to normal standard for usage ins the department.

Defects comes up due to inability to renovate and also inability of proper usage.

There may be scratches over the table top, breakage in the legs joining or even breakages in the joints found before the tabletop.  Before renovating, the location of the symptom and the kind of materials involved are put into consideration.

At the end of the every defect, the renovation of that actual defect is discussed in this project.

TABLE OF CONTENTS CHAPTER ONE

1.0       introduction

1.1              Aim of the project

1.2              Objectives of the project

1.3              Scope of the study

CHAPTER TWO

2.0       literature review

CHAPTER THREE

3.0              Specification of problems

3.1       history and background of information

3.2              Condition of use

3.3              Characteristics

3.4              Appearance (aesthetic)

3.5              Performance

3.6              Reliability and life

CHAPTER FOUR

4.0       material selection

CHAPTER FIVE

5.0       construction details

CHAPTER SIX

6.0       cost analysis

6.1              Material cost

6.2              Labour cost

6.3              Miscellaneous cost

6.4              Market cost

6.5              Market cost of product (over all)

CHAPTER SEVEN

7.0       testing and evaluation

CHAPTER EIGHT

8.0       recommendation

8.1              Conclusion

8.2              Bibliographical references

8.3              Working diagrams

CHAPTER ONE

INTRODUCTION

The term refurbishing has been defined in many ways by many experts from both building, and furniture perspective.

The oxford advance learners dictionary definition of refurbishing is the widely and a generally accepted definition of refurbishing.

It defines refurbishing as the work embark or undertaken in order to clean and decorate a room, building or in order to make it more attractive and more useful.  This simply means a programme transformation of a particular place or thing at a point in time.

The drawing studio requires special consideration to preserve the original studio nature after it has deteriorated, and repair work at different period must be considered when the new defects are first discovered, when this is being considered recently, it can serve as a remedy towards breakage of tables and the deterioration of the studio.

These may be wrongly diagnosed, consequently, the remedies for refurbishing prescribed the drawing studio may fall and further experience and investigation leads to effective remedies or maintenance strategies.

Refurbishing is sub divided into three types and these are

1.         Life style refurbishing:         This involves improving a home and a way of life.  It might involve building a sunroom for pleasure or converting unused attic space into living quarters to meet ones changing needs.

2.         Retroit Projects Refurbishing:         This usually focuses on home shells or mechanical systems such as

i.                    Upgrading an insulation system

ii.                  Putting on new siding

iii.                Replacing a furnace

3.         Maintenance and Repair Refurbishing:     This project the investment found in a house, workshop, or a room through activities such as:

i.                    Repair of furniture

ii.                  Caulking windows

iii.                Reshingling roofs

iv.                Replacing equestronughs

AIM OF THE PROJECT

The basic aim of this project is to identify the importance of refurbishing in our institutions of higher learning, and also to know the correct types to be used at any point in time.

OBJECTIVE OF THE PROJECT

The objectives of the project are as follow

1.                  To know the importance or refurbishing

2.                  To improve the understanding rate of the users of the project, by making them feel comfortable whenever there are in the drawing studio.

3.                  To help bring back to the departmental acceptance of the standard of the drawing studio.

SCOPE OF THE STUDY

This project “Refurbishing of the Mechanical Engineering Drawing Studio.

This project is further limited to the Mechanical Engineering Drawing Studio, which might equally serve as a case study.  And because of this, we will only consider here, the refurbishing of the Mechanical Engineering Drawing Studio.

Download Full and Complete Project

Sharing is caring!

About Hope Ovat

Check Also

CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS

CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG …

AUTOMOBILE MOTOR VEHICLE CONSTRUCTION

AUTOMOBILE MOTOR VEHICLE CONSTRUCTION Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: 1-5 …

THE CONSTRUCTION AND FABRICATION OF A CANDLE MOLDING MACHINE

THE CONSTRUCTION AND FABRICATION OF A CANDLE MOLDING MACHINE Format: Ms Word Document Pages: 65 …

THE CONSTRUCTION OF SIEVE EQUIPMENT

THE CONSTRUCTION OF SIEVE EQUIPMENT Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: …

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER Format: Ms Word Document Pages: 65 …

NYLON CUTTING AND SEALING MACHINE

NYLON CUTTING AND SEALING MACHINE Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: …

Leave a Reply