THE FABRICATION OF A PRESSURIZED KEROSENE OVEN

THE FABRICATION OF A PRESSURIZED KEROSENE OVEN

ABSTRACT

This project has been fabricated with special economical needs for the small scale baking industries, wholesalers and distributors who import this type of baking oven from outside the country to supply the customers.

Who wish to use it or those that cannot after gas oven can be used in baking any type of available within the tropics.

It I am also be used in are where there are no source of electricity or gas.

TABLE OF CONTENT

CHAPTER ONE

INTRODUCTION

CHAPTER TWO

Literature Review

CHAPTER THREE

Specification of Problem

CHAPTER FOUR

Synthesis of Solutions/Material Solution

Design and Analysis Theory

CHAPTER FIVE

Sequence of Operation

Operation of Apparatus

Maintenance

CHAPTER SIX

Testing and Evaluation

Capacity/ Fuel Shortage Detection

Efficiency Performance

CHAPTER SEVEN

Material Cost Analysis

Machine Cost Analysis

Labour Cost Analysis

CHAPTER EIGHT

Conclusion

Recommendation

Reference

Appendix

CHAPTER ONE

The fabrication of this project kerosene oven is a borrowed idea, which was modified to improve the system.

It is a manually operated type of oven which has the capability of supplying heat energy at high and low temperatures. This type of oven operates with a single point burner.

The introduction of this type of pressurized oven in the 18th century has undergone series of modification till date.

The production of this baking appliance is cost effective. This has improved the local industries/factories and has reduced the importation of foreign types of baking appliance.

The local kerosene pressurized oven is operational effective. Thus it attains a very high temperature for the convenience of baking.

Download Full and Complete Project

About Hope Ovat

Check Also

CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS

CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG …

AUTOMOBILE MOTOR VEHICLE CONSTRUCTION

AUTOMOBILE MOTOR VEHICLE CONSTRUCTION Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: 1-5 …

THE CONSTRUCTION AND FABRICATION OF A CANDLE MOLDING MACHINE

THE CONSTRUCTION AND FABRICATION OF A CANDLE MOLDING MACHINE Format: Ms Word Document Pages: 65 …

THE CONSTRUCTION OF SIEVE EQUIPMENT

THE CONSTRUCTION OF SIEVE EQUIPMENT Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: …

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER Format: Ms Word Document Pages: 65 …

NYLON CUTTING AND SEALING MACHINE

NYLON CUTTING AND SEALING MACHINE Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: …

Leave a Reply

Your email address will not be published. Required fields are marked *