CONSTRUCTION OF A STANDARD BANKING OVEN WITH DUAL POWER SOURCE (ELECTRIC/GAS)

CONSTRUCTION OF A STANDARD BANKING OVEN WITH DUAL POWER SOURCE (ELECTRIC/GAS)

ABSTRACT

This project is designed to make the students utilize as many theoretical and practical concept as have been instructed in alstron to mechanical engineering workshop technology.

Students are expected to learn and apply concepts, principles about energy specially the conversions of  electrical energy to thermal energy, conduction and conventional heat transfer etc.

Also the determination of the properties of various ferrous and non-ferrous materials, electrical installation occults.  The application of engineering measurement and quality control.

Also to build an intellectual ability in interpretation of working drawing in designing and development before and after working process.  Students will get an opportunity to appreciate safety, and the use of both machine and hand tools in the course of working.

CHAPTER ONE

BACKGROUND

1.1.0OBJECTIVES

This project is undertaken to

(1)             Compare the various ways used in the production of an electric and gas oven.

(2)             Disclose the different types of process in the manufacturing of an electric oven and also a gas oven in the past in comparison to the morden days method.

(3)             Exploit the local facilities available in the construction of the oven as against imported ovens.

(4)             To exhibit the usefulness of a dual-purpose oven in the economy and technology growth of the nation.

(5)             To know the convenience in the use of alternate power source for operation of ovens.

(6)             Discover the basic principle involved in the design and maintenance of a dual purpose oven.

1.2.0IMPORTANCE OF OVENS

In actual analytical enunciation an oven is an enclosed chamber in which things are heated or cooked with various sources of power.

Its importance borders around its function, which are as follows;

(i)                It is used to meet the everyday basic need of cooking, (baking, toasting, gritting, toasting) of food materials for human consumption.

(ii)             Ovens are used for heat treatment of substance in laboratories and industries.

(iii)           Also as a means of preservation by heat application to perishable materials (organic and inorganic) in general.

(iv)           Sterilization of instruments and equipment for industrial use is done by heat application using oven.

(v)             Expelling of moisture content to a required measure in some substance is also done using oven.

(vi)           Early manufactured ovens where used as a source of room heaters during cold weathers in cold climates.

Other importance boarding around its energy source is that the use an alternative source of energy when either fossil fuel or electricity is not available.  This can be relatively save cost when necessitated.

1.3.0LIMITATIONS

Disadvantages in the use of ovens:

(i)      Cleaning and repair is a difficult and time- consuming endeavor.

(ii)             Expect for mass production singular construction is relatively expensive to produce.

(iii)           If precautions are not well carried out, it can result in fire hazard, which is dangerous to life and properties.

(iv)           Because ovens provides heat for one or more areas, the temperature may vary in different areas of the oven.

(v)             Oils and moisture collected on metal surface can end up trying to rust the metal coating if not clean regularly.

(vi)           It is expensive to operate in high volume operations.

(vii)        Speed seem to be the key factor and time taken to get to required constant temperature can be wastage of time.

(viii)      Access to internal component n case of adjustment and maintenance is tasking as it requires an entire disassembling.

(ix)           In case of mechanical faults resulting from shut down, an entire disassembling and requires is required.

(x)             Due to its function by heating, there is always a premature wear or mechanical failure of some of the internal component.

Download Full and Complete Project

About Hope Ovat

Check Also

CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS

CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG …

AUTOMOBILE MOTOR VEHICLE CONSTRUCTION

AUTOMOBILE MOTOR VEHICLE CONSTRUCTION Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: 1-5 …

THE CONSTRUCTION AND FABRICATION OF A CANDLE MOLDING MACHINE

THE CONSTRUCTION AND FABRICATION OF A CANDLE MOLDING MACHINE Format: Ms Word Document Pages: 65 …

THE CONSTRUCTION OF SIEVE EQUIPMENT

THE CONSTRUCTION OF SIEVE EQUIPMENT Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: …

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER Format: Ms Word Document Pages: 65 …

NYLON CUTTING AND SEALING MACHINE

NYLON CUTTING AND SEALING MACHINE Format: Ms Word Document Pages: 65 Price: N 3,000 Chapters: …

Leave a Reply

Your email address will not be published. Required fields are marked *