CONSTRUCTION OF STEEL CUPBOARD

CONSTRUCTION OF STEEL CUPBOARD

ABSTRACT
The aim of this project was to construct a steel cupboard in order to help us acquire the knowledge of fabrication of a modern cupboard and the essence of it. Also to enable us (the students of chemical Engineering) to know how to construct as future engineers.
The construction of steel cupboard was done using a square pipe of 1.5mm thickness and the mild steel having a thickness of 1.5mm. it was mark out cut, welded, filled and painted. The cupboard has length and height of 1150mm and 1160mm and dept 400mm. A grade of 12 electrode was used for the welding process.
The material used was locally sourced and selected to suit the desired purpose. Mild steel was used due to it’s cost and it’s corrosion free nature. No problem was encounter as regard the construction work. As a result of the quality of the material and it’s properties, a guarantee of ten years is given to the construction work. Advantage of steel cupboard as in preserving and securing of laboratory chemicals and equipment, keeping of document in offices out ways it’s disadvantage. The cost of production of the steel cupboard was fifteen thousand naira.
TABLE OF CONTENT
Title Page
Approval Page
Letter Of Transmittal
Acknowledgement
Abstract
Table Of Contents
Chapter One
1.0 Introduction
Chapter Two
2.0 Literature Review
2.1 Historical Development Of Cupboard
2.2 Types Of Cupboard
2.3 Comparison Of Wood And Steel For Construction Of Cupboard.
2.4 Steel Making
2.5 Steel And Its Classification
Chapter Three
3.0 Material Selection
3.1 General Properties Of Engineering Materials
3.2 Metal And Its Properties
3.3 Ferrous Metal
3.4 Non-Ferrous Metal
3.5 Properties Of Steel
3.6 Wood And Its Properties
3.7 Glass And Its Properties
3.8 Material Of Construction
Chapter Four
4.0 Constructional Procedure / Method
4.1 Sketching And Drawing
4.2 Marking Out
4.3 Cutting
4.4 Bending And Folding
4.5 Welding
4.6 Painting / Organic Coating
Chapter Five
5.0 Discussion
5.1 Description Of The Modern Steel Cupboard
5.2 The Base
5.3 The Sides
5.4 The Back
5.5 Partition / Rack
5.6 The Rollers
5.7 The Stopper
5.8 The Lock
5.9 The Door
5.10 Precautions On Usage
Chapter Six
6.0 Conclusion
Chapter Seven
7.0 Recommendation
References
Appendix
CHAPTER ONE
Chapter One of Construction Of Steel Cupboard Project Material starts from here.
1.0 INTRODUCTION
A cupboard is a set of shelves with a door or doors in front either built into the wall of a room or as a separate piece of furniture, there are so many kinds of cupboard such as office cupboard, labouratory cupboard kitchen cupboard, linen cupboard, etc.
Cupboard is generally used for storing materials in the labouratory, offices, kitchen and homes such as books, foodstuffs, cloths, files, dishes, audio and video cassettes, glassware, chemical reagents, etc. cupboard can be made with different types of materials such as steel, wood, glass, and some other kinds of metals.
In the constructional project, steel as a material of construction has a lot of advantages over wood. It is not attacked by termites or insect and lasts longer (i.e. are durable) than that of wood that is commonly used. Steel cupboard is usually a rectangular piece of steel fabricated for the purpose of storage. Since steel cupboard cannot be broken. Since steel cupboard, then the material kept inside it is preserved. Though metals are known to corrode of which the primary causative agents are air, moisture and some chemicals but when the cupboard is not exposed to moisture by adopting preventive measure like organic coating (i.e. painting) to increase its resistance to corrosion.
During the construction of the cupboard, the research considerations were the material availability, its durability, quality affordability and the maintenance and replacement of the parts of the cupboard or the shelf. Hence, a research was carried out on the Engineering property of the material of construction. Steel used for the construction is environmental friendly, hazardous and resistant to insect attacks. This is the area in which the cost of production was made, by adopting some amendment with the aim to achieve the steel cupboard; in such a way that it becomes a modern steel cupboard of a standard size which can contain quite some number of materials like books, files and some labouratory materials.
The research was done also, so as to obtain the greatest design with the desired structural material for the cupboard to maintain its quality for a long period of time without having any fault or damage, hence, it is important to produce facility hence, it is last longer and the quality been of a great importance in the construction of the steel cupboard.
The various parts were arranged and shaped, connected in such a way that it will provide an efficient and economical solution to the construction problems. The cost was also considered so much because the cost usually involves quality of the material. But in designs and construction, it is possible to produce a quality steel cupboard with reduced or less cost. And the labour cost of fabricating the material was involved too, during the construction. The steel cupboard was fixed with rollers stands and stoppers for stability at any point it is kept and for easy mobility, which was solidly welded. All these factors were taken into consideration so as to produce a quality and durable steel cupboard that is affordable. The cupboard was constructed to the test of maintenance and durability.
Chapter One of Construction Of Steel Cupboard Project Material ends here.

CHAPTER TWO
Chapter two of this Construction Of Steel Cupboard research work is available. Order Full Work to download. Chapter Two of “Construction Of Steel Cupboard Contains: Literature Review, Historical Development Of Cupboard, Types Of Cupboard, Comparison Of Wood And Steel For Construction Of Cupboard, Steel Making, Steel And Its Classification .
CHAPTER THREE
Chapter three of this Construction Of Steel Cupboard academic work is available. Order Full Work to download. Chapter Three of “Construction Of Steel Cupboard Contains: Material Selection, General Properties Of Engineering Materials, Metal And Its Properties, Ferrous Metal, Non-Ferrous Metal, Properties Of Steel, Wood And Its Properties, Glass And Its Properties and Material Of Construction .
CHAPTER FOUR
Chapter four of this Construction Of Steel Cupboard project work is available. Order Full Work to download. Chapter Four of Construction Of Steel Cupboard Contains: Constructional Procedure / Method, Sketching And Drawing, Marking Out, Cutting, Bending And Folding, Welding and Painting / Organic Coating .
CHAPTER FIVE
Chapter five of this Construction Of Steel Cupboard material is available. Order Full Work to download. Chapter Five of Construction Of Steel Cupboard Contains: Discussion, Description Of The Modern Steel Cupboard, The Base, The Sides, The Back, Partition / Rack, The Rollers, The Stopper, The Lock, The Door and Precautions On Usage .
CHAPTER SIX
Chapter six of this Construction Of Steel Cupboard material is available. Order Full Work to download. Chapter Six of “Construction Of Steel Cupboard Contains: Conclusion .
CHAPTER SEVEN
Chapter seven of this Construction Of Steel Cupboard material is available. Order Full Work to download. Chapter Seven of “Construction Of Steel Cupboard Contains: Recommendation, References and Appendix.
.

 

Download Full and Complete Project

About Hope Ovat

Check Also

PRODUCTION OF WOOD ADHESIVE

PRODUCTION OF WOOD ADHESIVE Format: Ms Word Document Pages: 68 Price: N 3,000 Chapters: 1-5 …

THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSION PAINT

THE USE OF LOCAL PIGMENTS AND EXTENDERS FOR FORMULATION AND PRODUCTION OF EMULSION PAINT Format: …

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH

PRODUCTION OF BLACK AND BROWN POLISH BROWN POLISH Format: Ms Word Document Pages: 65 Price: …

PRODUCTION OF LIQUID AND VAPOURIZED PERFUME

PRODUCTION OF LIQUID AND VAPOURIZED PERFUME Format: Ms Word Document Pages: 65 Price: N 3,000 …

PRODUCTION OF PLASTIC MATERIALS

PRODUCTION OF PLASTIC MATERIALS Format: Ms Word Document Pages: 70 Price: N 3,000 Chapters: 1-5 …

PRODUCTION OF PLANE MIRROR USING LOCAL RAW MATERIAL

PRODUCTION OF PLANE MIRROR USING LOCAL RAW MATERIAL Format: Ms Word Document Pages: 65 Price: …

Leave a Reply

Your email address will not be published. Required fields are marked *